Garland UK

Liqui-Zero

Manufacturer: Garland UK 

Materials: Flexible Polyesters 

The Certificate holder provided the following description for the system under assessment.

Liqui-Zero, a liquid-applied roof waterproofing system for use on limited access and, where appropriate, pedestrian access roofs, on warm and cold exposed roofs (flat and pitched), green roofs (flat, zero fall and pitched), protected warm and cold roofs (flat and zero fall), inverted roofs (flat and zero fall), blue roofs in combination with a storm water attenuation system, terraces, balconies and walkways across roof areas.


BBA logo

Number: 25/7425
Issue date: 04/08/2025

Approved for use on


Balconies, Terraces & Walkways Biodiverse Blue Roofs Flat Roofs Green Roofs Pitched Roofs Protected Roofs Roof Gardens Zero Falls Buried Roofs 

The system is intended for use as a waterproofing system for use on limited access and, where appropriate, pedestrian access roofs, on warm and cold exposed roofs (flat and pitched), green roofs (flat, zero fall and pitched), protected warm and cold roofs (flat and zero fall), inverted roofs (flat and zero fall), blue roofs in combination with a storm water attenuation system, terraces, balconies and walkways across roof areas.

 

Substrate


Concrete Existing Coatings/Roof Paints Insulation Boards Mastic Asphalt Metal Reinforced Bituminous Membranes Single Ply Membranes - EPDM Single Ply Membranes - PVC Single Ply Membranes - TPO Timber 

The system is suitable for use on:

Concrete
Asphalt
Plywood
Reinforced Bituminous membranes
Insulation
Single-ply membranes
Previously coated surfaces
Small areas of metal incidental to the roof e.g. pipe upstands
Small areas of plastic-coated metal incidental to the roof

Durability


30 Years 

Under normal service conditions, the system will have a life in excess of 30 years, provided it is designed, installed and maintained in accordance with this Certificate and the Certificate holder’s instructions.

When fully protected, under normal service conditions, the system will have a life at least equivalent to the roof in which it is incorporated, provided it is designed, installed and maintained in accordance with this Certificate and the Certificate holder’s instructions.

In situations where maintenance or repair of any of the components in the roof structure are necessary (eg protection layer or insulation), the durability of the system may be In these circumstances, the Certificate holder must be consulted, but such advice is outside the scope of this Certificate.

An estimation cannot be given for the life of green roof specifications owing to the nature of use; however, under normal circumstances, it will be significantly greater than for exposed waterproof coverings.

Installation Requirements


Practicability of installation was assessed by the BBA on the basis of Certificate holder’s information. To achieve the performance described in this Certificate, the system must only be installed by contractors who have been trained and approved by the Certificate holder.

Fire Safety


When tested to CEN/TS 1187 : 2012, Test 4 and classified to BS EN 13501-5 : 2016, the construction given in Table 1 of the BBA Certificate achieved BROOF(t4) for slopes below 10°.

  • Downloads

Garland UK Limited

Second Way Centre
Second Way
Avonmouth
BS11 8DF

T : 0117 440 1050

E : info@garlanduk.com

Website disclaimer:

“The information contained in this Website is for general information purposes only. The information is provided by manufacturer members and their accreditation certifications and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with regard to information or products. Any reliance you place on such information is therefore strictly at your own risk.

LRWA Is not an accreditation body and does not test products or have a role in determining whether a product or system is fit for purpose. An agrément certificate is only issued for a successful product or system following a detailed assessment including both laboratory testing and inspections by the certificate provider.”