Bauder Limited

Liquitec Balcony, Walkway & Terrace systems

Part of Liquitec Roof System

Manufacturer: Bauder Limited 

Materials: Poly Methyl Methacrylates (PMMA) 

Bauder LiquiTEC Balcony, Walkway and Terrace Systems are reinforced waterproofing and surfacing systems comprising a waterproofing membrane, wearing course and finish based on liquid-applied polymethylmethacrylate resins.

Details of individual components used in the systems are:

  • Bauder LiquiPRIME 1 — a resin for priming asphalt
  • Bauder LiquiPRIME 2 — a resin for priming cementitious materials, brickwork and timber
  • Bauder LiquiPASTE — a resin for repairing cracks and holes in the substrate
  • Bauder PMMA Cleaner — used for cleaning metal and plastic substrates, cleaning tools, and re-activating previously-applied resin
  • Bauder LiquiDETAIL — for use in waterproofing upstands and details
  • Bauder LiquiFIBRE — a resin for use in waterproofing awkward shapes and areas where access is restricted
  • Bauder LiquiBALKON — a resin for use in waterproofing main flat areas, when a reinforced system is specified • Bauder 110 g reinforcement fleece — a polyester reinforcement fleece with a nominal mass per unit area of 110 g·m–2 for use with LiquiBALKON and LiquiDETAIL, available in 50 m long rolls of various widths
  • Bauder LiquiPAVE — a trowel-applied, thick-layer product, comprising Bauder LiquiPAVE R resin and Bauder LiquiPAVE F powder, to provide a bedding layer for the Bauder quartz. Not to be used where the structure is timber
  • Catalyst — a powder to be added to resins prior to application, to trigger the curing process. • Bauder Quartz — to be broadcast into the LiquiPAVE to provide a heavy-duty wearing layer
  • Bauder LiquiFINISH — a finish coat resin, used to provide the finished colour and a seal coat over the Bauder Quartz. Available in Blue Grey (RAL 7031), Traffic Grey (RAL 7043) and Stone Grey (RAL 7030)
  • Bauder Liquid Thixo — a thixotropic agent for use as an additive to Bauder LiquiPRIME and LiquiFINISH when treating upstands over 250 mm high.

BBA logo

Number: 14/5152 PS2
Issue date: 08/09/2014

ETA logo

Number: 04/0019
Issue date: 19/04/2010

Approved for use on


Balconies, Terraces & Walkways 

For use as waterproofing and surfacing for

  • walkways
  • balconies
  • terraces

Substrate


Concrete Mastic Asphalt 

A concrete or asphalt surface of a concrete deck designed in accordance with the UK National Annex to BS EN 1992-1-1 : 2004 in conjunction with BS EN 1992-1-1 : 2004

Durability


15 Years 

Accelerated weathering tests and evidence from existing installations confirm that satisfactory retention of physical properties is achieved. All available evidence indicates that under normal conditions the system will have service life in excess of 15 years.

Some colour change to the finish coat may be expected when exposed to UV radiation. The degree of colour change likely to occur will depend on the colour. The Certificate holder should be consulted for more information.

Installation Requirements


The systems should only be installed by installers who have been trained and approved by the Certificate holder.

Puncture Resistance


P1 - non accessible

Most Compressible Substrate (eg insulation)


P4 - roof gardens, inverted roofs and green roofs)

Least compressible (eg concrete)


Fire Safety


A composite build-up comprising:

  • The Bauder LiquiBALKON applied at a rate of 3.1 kg·m–2 including Bauder 110 g reinforcement fleece
  • a 0.6 mm thick bitumen carrier membrane
  • 120 mm thick PIR Insulation board bonded to a vapour control membrane with a two-component PUR adhesive
  • 19 mm thick plywood primed with a synthetic rubber resin

When tested in accordance with DD CEN/TS 1187 (Test 4), was classified in accordance with EN 13501-5 as European Class BROOF(t4), and when tested in the flat position in accordance with BS 476-3 : 2004 achieved an EXT.F.AA rating. The system can contribute to a roof being unrestricted under the national Building Regulations.

The designation of other specifications should be confirmed by: England and Wales — test or assessment in accordance with Approved Document B (Volumes 1 and 2), Appendix A, clause A1; Scotland — test to conform to Mandatory Standard 2.8, clause 2.8.1; Northern Ireland — test or assessment by a UKAS accredited laboratory, or an independent consultant with appropriate experience.


Certified Products

The following products are also covered by the same certification:

  • Downloads

Bauder Ltd

70 Landseer Road
Ipswich
IP3 0DH

T : 0845 271 8800

E : info@bauder.co.uk

Website disclaimer:

“The information contained in this Website is for general information purposes only. The information is provided by manufacturer members and their accreditation certifications and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with regard to information or products. Any reliance you place on such information is therefore strictly at your own risk.

LRWA Is not an accreditation body and does not test products or have a role in determining whether a product or system is fit for purpose. An agrément certificate is only issued for a successful product or system following a detailed assessment including both laboratory testing and inspections by the certificate provider.”