Elastex Solo Systems

Approved for use on

Flat Roofs Pitched Roofs 

For use as a waterproofing layer on flat or pitched roofs, for new work, or for repairing or maintaining the waterproof layer of existing, structurally sound, roofs with limited access.

Substrate

Concrete Mastic Asphalt Reinforced Bituminous Membranes 

The system can be used on the following substrates:

• concrete(1)
• mastic asphalt (roofing grade)(1)(2)
• reinforced bituminous membranes(1)(2)

(1) Elastaseal Z Binder Sealer.
(2) Owing to the variable nature of these materials, acceptable adhesion should be confirmed by test

Durability

25 Years 

Under normal Service Conditions, the system will have a service life of up to 25 years.

Installation Requirements

The system should be installed by installers who have been trained and approved by the certificate holder. Details of these are available form the certificate holder.

Fire Safety

In the opinion of the BBA, the system, when applied to a substructure comprising a 12mm calcium silicate board, foil faced carrier membrane, a coat of Elastex Solo Binder Sealer applied at a rate of 0.1 litres per M², a coat of Elastex Solo applied at a rate of 1 litre per m² reinforced with 100 g.m² of Polymat 100 Glassfibre matting and 0.5 litres per m² of top coat can be classified (Exova Warringtonfire – BS 476-3 : 2004 – external fire exposure test, document reference 360762) as Broof (t4)

The designation of other specifications, eg when used on combustible substrates, should be confirmed by: England and Wales — test or assessment in accordance with Approved Document B, Appendix A, Clause 1 Scotland — test to conform to Mandatory Standard 2.8, clause 2.8.1(1)(2) (1) Technical Handbook (Domestic). (2) Technical Handbook (Non-Domestic). Northern Ireland — test or assessment by a UKAS-accredited laboratory, or an independent consultant with appropriate experience.