Fleet Coat 30

Approved for use on

Flat Roofs Green Roofs Pitched Roofs Roof Gardens Zero Falls Buried Roofs 

For use on flat, zero fall and pitched roofs with limited access, including green roof and roof garden specifications.

Substrate

Concrete Metal Plastic Reinforced Bituminous Membranes Timber 

Fleet Coat 30 is satisfactory for use as waterproofing system on flat and pitched roofs with limited access, on substrates of:
• concrete
• bituminous
• timber
• metal
• plastic

Durability

25 Years 

Fleet Coat 30 will achieve a service life in excess of 25 years.

Installation Requirements

The system should only be installed by installers who have been trained and approved by the Certificate holder.

Fire Safety

A system, installed on a flat roof, comprising a 12 mm thick gypsum glassrock roof board, primed with Fleet Primer P and coated with Fleet Coat 30 (grey) reinforced with Fleet 105 Fleece, will be unrestricted by the national Building Regulations.

In the opinion of the BBA, a roof garden incorporating the system covered with a drainage layer of gravel 100 mm thick and a soil layer of minimum 300 mm thick, will be designated BROOF(t4).

In the opinion of the BBA, when the system is used in irrigated roof gardens its use will be unrestricted under the requirements of the national Building Regulations.

If allowed to dry, plants used in a roof garden may allow flame spread across the roof. This should be taken into consideration when selecting suitable plants.

The designation of other specifications should be confirmed by: England and Wales — test or assessment in accordance with Approved Document B, Appendix A, clause A1 Scotland — test to conform to Mandatory Standard 2.8, clause 2.8.1(1)(2) (1) Technical Handbook (Domestic). (2) Technical Handbook (Non-Domestic). Northern Ireland — test or assessment by a UKAS-accredited laboratory, or an independent consultant with appropriate experience.