Icopal

Sealoflex Endura Balcony Waterproofing System

Part of Sealoflex Endura Roof Waterproofing System

Manufacturer: Icopal 

Materials: Poly Methyl Methacrylates (PMMA) 

Sealoflex Endura Balcony Waterproofing Systems are reinforced waterproofing and surfacing systems comprising a waterproofing membrane, wearing course and finish based on liquid-applied polymethylmethacrylate resin.

The systems comprise the following components:
• Sealoflex Endura Balcony System — Sealoflex Endura Concrete Primer or Sealoflex Endura Asphalt Primer Sealoflex Endura Reinforcing Fabric, Sealoflex Endura Balcony Waterproofing Layer and Sealoflex Endura Balcony Wearing Layer. The system is available with various surfacing options
• Sealoflex Endura Balcony Buried System — Sealoflex Endura Asphalt Primer Sealoflex Endura Reinforcing Fabric, Sealoflex Endura Balcony Waterproofing Layer and optional Sealoflex Endura Balcony Wearing Layer and/or Sealoflex Endura Finish Coat. The system is for use in buried/protected locations


BBA logo

Number: 20/5753 PS2
Issue date: 10/08/2020

Approved for use on


Balconies, Terraces & Walkways Brown Roofs Green Roofs Inverted Roofs Roof Gardens Zero Falls Buried Roofs 

Sealoflex Endura Balcony Waterproofing Systems, when applied to a concrete or asphalt surface of a concrete deck designed in accordance with BS EN 1992-1-1 : 2004 and its UK National Annex or equivalent, are satisfactory for use as a combined waterproof/wearing surface for:
• walkways
• balconies
• terraces, including inverted roof, green roof, brown roof, roof garden and protected zero fall.

Substrate


Concrete 

Sealoflex Endura Balcony Waterproofing Systems, when applied to a concrete or asphalt surface of a concrete deck.

Durability


15 Years 

Under normal service conditions, the systems will have a service life in excess of 15 years.

Installation Requirements


The system should only be installed by installers who have been trained and approved by the Certificate holder.

Fire Safety


When tested to DD CEN/TS 1187 : 2012, Test 4, a composite build-up comprising 19 mm thick plywood primed with a synthetic rubber resin, 120 mm thick PIR Insulation board bonded to a vapour control membrane with a two-component PUR adhesive, a 0.6 mm thick bitumen carrier membrane,
the Sealoflex Endura Balcony Waterproofing Layer applied at a rate of 3.1 kg·m–2, including Sealoflex Endura Reinforcing Fabric, was classified in accordance with BS EN 13501-5 : 2005 as European Class BROOF(t4).

In the opinion of the BBA, a roof incorporating the systems will be unrestricted under the national Building Regulations in the following circumstances:
• Protected or inverted roof specifications, including an inorganic covering listed in the Annex of Commission Decision 2000/553/EC,
• a roof garden covered with a drainage layer of gravel 100 mm thick and a soil layer 300 mm thick,
• irrigated roof gardens, green roofs and brown roofs.

The designation of other specifications should be confirmed by reference to the requirements of the documents supporting the national Building Regulations.

When classified in accordance to EN 13501-1 2007 Sealoflex Endura Balcony achieved a rating of Euroclass E.

If allowed to dry, plants used may allow the spread of flame across the roof. This must be taken into consideration when selecting suitable plants for the roof. Appropriate planting, irrigation and/or protection must be applied to ensure the overall fire-rating of the roof is not compromised.


Certified Products

The following products are also covered by the same certification:

  • Downloads

Interested in this product?

Website disclaimer:

“The information contained in this Website is for general information purposes only. The information is provided by manufacturer members and their accreditation certifications and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with regard to information or products. Any reliance you place on such information is therefore strictly at your own risk.

LRWA Is not an accreditation body and does not test products or have a role in determining whether a product or system is fit for purpose. An agrément certificate is only issued for a successful product or system following a detailed assessment including both laboratory testing and inspections by the certificate provider.”