![Triflex](https://product-register.lrwa.org.uk/wp-content/uploads/2022/12/Triflex-Logo1.jpg)
Triflex SmartTec Solvent-Free Waterproofing System
Manufacturer: Triflex
Materials: Silane Terminated Polyether
Triflex SmartTec® is based on a reinforced, one part, liquid-applied, solvent and isocyanate free, silane terminated polyether. The system comprises:
- Triflex SmartTec — a one-component, solvent and isocyanate free, silane terminated polyether. Available in stone grey and traffic grey and pure white
- Triflex 110 g Reinforcement — a polyester fleece with a nominal mass per unit area of 110 g∙m–2, for use in reinforcing the system
![BBA logo](https://product-register.lrwa.org.uk/wp-content/themes/basetheme/assets/images/bba-logo.jpg)
Number: 13/5051 PS9
Issue date: 19/11/2021
![ETA logo](https://product-register.lrwa.org.uk/wp-content/themes/basetheme/assets/images/eta-logo.jpg)
Number: 17/0284
Issue date: 02/08/2018
Approved for use on
Flat Roofs Pitched Roofs Zero Falls Buried Roofs
For use as a liquid-applied roof waterproofing, for new and existing flat, protected zero fall and pitched roofs with limited access.
Substrate
Concrete Insulation Boards Reinforced Bituminous Membranes Steel Timber
The system is suitable for use on the following substrates:
• concrete
• insulation
• timber
• steel
• reinforced bitumen roofing membranes.
Durability
25 Years
Under normal conditions, the system will have a service life in excess of 25 years.
Installation Requirements
The system should only be installed by installers who have been trained and approved by the Certificate holder.
Puncture Resistance
P1 - non accessible
Least compressible (eg concrete)
P4 - roof gardens, inverted roofs and green roofs)
Most Compressible Substrate (eg insulation)
Fire Safety
When tested to DD CEN/TS 1187 : 2012, test 4 and classified in accordance with BS EN 13501-5 : 2005 the following system was classified BROOF(t4) and so is unrestricted with respect to proximity to a boundary by the documents supporting the national building Regulations(1):
- 18mm thick plywood
- a layer of Triflex FastPrime
- A layer of self-adhesive vapour control layer
- a layer of two-component PUR adhesive
- 120mm thick PIR Insulation board
- layer of Triflex SmartTec applied at a rate of 3 kg-m-2
(1) Fire test and classification reports 369067 WF 370902 respectively conducted by Exova WarringtonFire. report available from the certificate holder
The system when including an organic covering listed in the Annex of commission decision 2000/553/EC, is also unrestricted under the national Building Regulations.
The designation of other specifications should be confirmed by reference to the requirements of the documents supporting the national Building Regulations
In England and Wales, the system, when used in pitches of greater then 70o excluding upstands, should not be used on buildings that have a storey of at least 18m above ground level and which contain one or more dwellings, an institution, a room for residential purposes (excluding any room in a hostel, hotel or building house), student accommodation, care homes, sheltered housing, hospitals or dormitories in boarding schools.
In Scotland, the system, when used in pitches of greater then 70o excluding upstands, should not be used on buildings that have a storey of at least 11m above ground level.
-
Downloads
-
BBA Certificate – Triflex SmartTec
Document class :
Document type : Link
-
ETA 17/0284
Document class :
Document type : File
-