Hyraflex 2nd Generation Monolithic Hot melt Trafficked Deck
Part of Hyraflex 2nd Generation Monolithic Hot melt waterproofing
Manufacturer: Axter Limited
Materials: Hot Applied Polymer Modified Bitumen (Hot Melt)
The Hyraflex Second Generation Monolithic Hot Melt Structural Trafficked Deck Waterproofing System is a seamless, hot applied, elastomeric bitumen membrane and compound waterproofing system reinforced with a polyester mesh, with a nominal thickness of 6 mm. The system consists of:
- Hyraflex Hot Melt monolithic elastomeric compound — a hot-applied polymer-modified bitumen compound
- Hyraflex Reinforcement — a polymeric mesh (100 g·m-2) for use as the reinforcement layer for the system
- Hyraflex Primer — a surface preparation primer, for use prior to the application of the hot-applied membrane
- Hyraflex 35 — a polyester reinforced (180 g·m-2) elastomeric SBS modified bitumen, root resistant, waterproofing membrane. The upper and lower surfaces are finished with fine sand
- Hyraflex 35 S — a stabilised polyester reinforced (180 g·m-2) elastomeric SBS modified bitumen waterproofingmembrane. The upper surface is finished with sand and lower surface with a thermofusible film
- Hyraflex 35 Trafic — a stabilised polyester reinforced (180 g·m-2) elastomeric SBS modified bitumen, root resistant, waterproofing membrane. The upper surface is finished with mineral slate chippings and the lower surface with a thermofusible film.
Number: 19/5709 PS2
Issue date: 26/11/2019
Approved for use on
Parking Decks Podium Decks
The Hyraflex Second Generation Monolithic Hot Melt Structural Trafficked Deck Waterproofing System, applied to a concrete deck laid in accordance with BS EN 1992-1-1 : 2004 and its UK National Annex, is satisfactory for use on trafficked parking decks subjected to vehicular and pedestrian traffic.
The system must be overlaid with a suitable trafficable wearing course that is compatible with the system.
Substrate
Concrete
The system must be applied only to prepared concrete substrates that are clean and free from ice, frost, laitance, oil or other contaminants that could impair the adhesion of the system. Suitable concrete finishes include tamped, timer-formed and U4.
Durability
10 Years
The system is durable and will remain effective, provided it is not damaged during subsequent resurfacingoperations, and will have a service life in excess of 10 years.
Installation Requirements
The system should only be installed by trained contractors using specialist equipment. Details of these are availablefrom the Certificate holder.
Fire Safety
The system, applied to a concrete substrate and overlaid with mastic asphalt or one of the inorganiccoverings listed in the Annex of Commission Decision 2000/553/EC, in Wales and Northern Ireland, maybe deemed to be of designation BROOF(t4) and so will be unrestricted under the national BuildingRegulations.
In England and Scotland, the system, applied to a concrete substrate and overlaid with one of theinorganic coverings listed in the Annex of Commission Decision 2000/553/EC, may be deemed to be of designation BROOF(t4) and so will be unrestricted under the national Building Regulations.
The designation of other specifications should be confirmed by reference to the requirements of thedocuments supporting the national Building Regulations.
Certified Products
The following products are also covered by the same certification:
-
Downloads
-
BBA – Hyraflex 2nd Generation Monolithic Hot melt Trafficked Deck
Document class :
Document type : Link
-